HP Xw460c - ProLiant - Blade Workstation 자주 묻는 질문 매뉴얼 - 페이지 7

{카테고리_이름} HP Xw460c - ProLiant - Blade Workstation에 대한 자주 묻는 질문 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP Xw460c - ProLiant - Blade Workstation 14 페이지. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
HP Xw460c - ProLiant - Blade Workstation에 대해서도 마찬가지입니다: 구현 매뉴얼 (35 페이지), 오류 방지 매뉴얼 (12 페이지), 기술 백서 (12 페이지), 펌웨어 업데이트 (9 페이지), 설치 매뉴얼 (2 페이지), 설정 포스터 (9 페이지), 설치 매뉴얼 (33 페이지), 관리 매뉴얼 (28 페이지), 하드웨어 매뉴얼 (23 페이지), 개요 (35 페이지), 사용자 설명서 (33 페이지), 최적화 매뉴얼 (13 페이지), 제한 보증 (10 페이지), 설치 지침 매뉴얼 (10 페이지), 설치 지침 매뉴얼 (8 페이지), 설치 지침 (4 페이지), 설치 지침 (2 페이지)

ISS Technology Update

Volume 6, Number 9

If DPOD has been turned off, simply use the licensePort command to initiate it.

NOTE

For the Brocade 4Gb SAN switch, DPOD assigns a port license only when a server blade with

HBA installed is inserted in the enclosure. A server blade without an active HBA will not prompt

the switch to assign a port license.

Dynamic licensing

Today, the concept of dynamic licensing is really quite flexible, enabling users to license any port and move licenses around

from port to port. In fact, they can allocate a license to a port, and then later de-allocate that license, putting it back in the pool

of available licenses.

A 12-port switch has 24 physical connections, but a maximum of 12 can be used at any given time. Licenses can be pre-

reserved for any port. Two external ports are pre-reserved as an out-of-box default, leaving 10 available for dynamic port

assignment. Customers are allowed to change this assignment ratio if desired (1:11 or 3:9 for example).

If DPOD is enabled, ports are assigned as activity is detected. Removing a connection does not de-allocate the port⎯this allows

maintenance removal and replacement without the license being given away to another port. As such, license persistence can

sometimes exhaust the pool of licenses. For instance, moving a server with an HBA across four server bays will result in licenses

being allocated to all four of those bays. Users are advised to occasionally review license assignments made by DPOD to free

up unneeded license associations; this will return them to the available license pool.

NOTE

It is possible to upgrade the Brocade 4Gb SAN switch to 24 licensed ports by purchasing

optional licenses. (Refer to "Additional resources" below for links to further information.)

Brocade Access Gateway feature

Users might also wonder if a license is required to enable the Brocade Access Gateway feature. Since this is a feature of the

FOS that is user-enabled through Brocade Web Tools or the Brocade CLI, no additional license is required. The number of port

licenses is still controlled by the switch's number of DPOD licenses.

Summary

Flexibility is the hallmark of port licensing; it can be assigned automatically or manually. The DPOD feature simplifies port

management:

• Automatically detects HBA connected server ports or cabled ports

• Automatically enables ports

• Automatically assigns port licenses