Panasonic PTL557U - LCD PROJECTOR 사용 설명서 - 페이지 24
{카테고리_이름} Panasonic PTL557U - LCD PROJECTOR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PTL557U - LCD PROJECTOR 48 페이지. Panasonic lcd projector operating instructions model no. pt-l557u
페이지 인쇄
Adjusting the Image Position, Horizontal Size and Phase
Confirm the picture position, Horizontal size, and Phase. If the picture is not correctly positioned within the display
area of the screen (the edge of the picture does not appear), adjust the picture position. (This only applies for RGB
input signal.)
When adjusting the Vertical Position (V POSI)
1
Press MENU to display the menu.
2
Press
o r
to select "RGB SYNC MENU", and
display the screen.
Note:
RGB signal, the name of mode, and Horizontal/Vertical
scanning frequency will appear in the top corner of the screen.
3
Press
o r
to select "V POSI".
Note:
When adjusting the Horizontal Position, Horizontal Size, and
Phase, move the arrow to the item you want to adjust.
4
Press
o r
to display the V POSI individual adjustment
screen.
5
Press
o r
to adjust the V POSI setting.
The current setting will be displayed on the screen by numerals
and a bar.
Note:
Depending on the adjustment item, the adjust procedure and
adjustment will vary. Please refer to the chart below.
Adjustment item
Press > button.
V POSI
Press < button.
Press > button.
H POSI
Press < button.
Adjust the dot clock of the personal computer and the LCD, Projector
H SIZE
to eliminate vertical stripe, etc. from the screen.
You can use this adjustment to eliminate the flicker (localized noise)
PHASE
that appears on the computer screens.
Note:
The last adjustment condition is saved and will not be erased even if the power is turned off.
Press MENU to remove the setup screen and menu.
Button
The image moves up.
The image moves down.
The image moves to the right.
The image moves to the left.
o r
t o
Adjustment
function display
Adjustment Details
24
Numeric
adjustment
level display
Adjustment Range
IMAGE
Max. value +30
Min. value -30
(The value differs with
IMAGE
each input signal.)
Max. value +50
IMAGE
IMAGE
Min. value -50
Max. value +90
Min. value -50
Max. value +31
Min. value 0
Bar display