Panasonic PTLB51NTU - LCD PROJECTOR - MULTI LANGUAGE 사용자 설명서 - 페이지 14
{카테고리_이름} Panasonic PTLB51NTU - LCD PROJECTOR - MULTI LANGUAGE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic PTLB51NTU - LCD PROJECTOR - MULTI LANGUAGE 44 페이지. Micro portable xga lcd projectors
Panasonic PTLB51NTU - LCD PROJECTOR - MULTI LANGUAGE에 대해서도 마찬가지입니다: 빠른 매뉴얼 (1 페이지), 빠른 매뉴얼 (1 페이지), 정보 시트 (4 페이지), 브로셔 및 사양 (4 페이지), 서비스 매뉴얼 (10 페이지)
페이지 인쇄
Connect
(cont.)
Connecting through the access point
You can make the setting for infrastructure mode
administrator on network settings before changing any settings.
※"Glossary" (See pages 39 - 40)
Projector settings
1
Turn on the projector and press the [NETWORK] button on the remote control.
Select [USER 1]- [USER 3] from [NETWORK] at the wireless menu and press the
2
[ENTER] button.
Set the details of network and select [OK].
3
As for network setting items, see pages 26 - 28.
Confirm to your system administrator on network settings before changing any settings.
The projector's MAC address
("Verifying settings"
Computer settings
4
Turn on the computer.
5
Make the network setting according to your system administrator.
When the user does not have the [Admin (administrator)] authority, the [Admin (administrator)]'s name and password are
required to make network settings.
6
Connect to your access point.
Start Wireless Manager ME 4.5, click [Wireless LAN] on the <Network Adapter
7
Selection> window and select the network adapter connected to the access port.
A confirmation message appears asking whether to switch the projector to the network or not. Select [No].
Select the desired projector on the <Select Access Port> window and click [OK].
8
[
] appears in the menu bar and a connection is established with the projector.
("Menu description"
If the projector is not displayed, click [Designate] followed by [ADD], then enter the IP address set in the projector using
the <Access Port Registration> window, and click [REGISTER]. (See page 16)
If you are unable to connect to the wireless LAN through the access point even after performing the steps in "
settings," contact the manufacturer of the access point.
(connection through the access point
※
can be checked with [STATUS] in the wireless menu of the projector unit.
※
see page 31) ※"Glossary" (See page 39)
See page 19)
※
14
); however, confirm to your system
Projector