Connect
(cont.)
Connecting through the access point
You can make the setting for infrastructure mode
administrator on network settings before changing any settings.
※"Glossary" (See pages 39 - 40)
Projector settings
1
Turn on the projector and press the [NETWORK] button on the remote control.
Select [USER 1]- [USER 3] from [NETWORK] at the wireless menu and press the
2
[ENTER] button.
Set the details of network and select [OK].
3
As for network setting items, see pages 26 - 28.
Confirm to your system administrator on network settings before changing any settings.
The projector's MAC address
("Verifying settings"
Computer settings
4
Turn on the computer.
5
Make the network setting according to your system administrator.
When the user does not have the [Admin (administrator)] authority, the [Admin (administrator)]'s name and password are
required to make network settings.
6
Connect to your access point.
Start Wireless Manager ME 4.5, click [Wireless LAN] on the <Network Adapter
7
Selection> window and select the network adapter connected to the access port.
A confirmation message appears asking whether to switch the projector to the network or not. Select [No].
Select the desired projector on the <Select Access Port> window and click [OK].
8
[
] appears in the menu bar and a connection is established with the projector.
("Menu description"
If the projector is not displayed, click [Designate] followed by [ADD], then enter the IP address set in the projector using
the <Access Port Registration> window, and click [REGISTER]. (See page 16)
If you are unable to connect to the wireless LAN through the access point even after performing the steps in "
settings," contact the manufacturer of the access point.
(connection through the access point
※
can be checked with [STATUS] in the wireless menu of the projector unit.
※
see page 31) ※"Glossary" (See page 39)
See page 19)
※
14
); however, confirm to your system
Projector
Друкувати сторінку