Diamondback 64683 사용 설명서 및 안전 지침 - 페이지 15

{카테고리_이름} Diamondback 64683에 대한 사용 설명서 및 안전 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamondback 64683 20 페이지. 7" heavy-duty tile saw with sliding table

Maintenance and Servicing

procedures not specifically explained in this manual must

be performed only by a qualified technician.

tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn:

turn the power Switch of the tool off, remove the Safety Key, and unplug the tool

from its electrical outlet before performing any procedure in this section.

tO prEVEnt SEriOuS inJury FrOM tOOL FaiLurE:

Do not use damaged equipment. if abnormal noise or vibration

occurs, have the problem corrected before further use.

cleaning, Maintenance, and Lubrication

1. BEFOrE EacH uSE, inspect the general

condition of the tool. Check for:

• loose hardware

• misalignment or binding of moving parts

• cracked or broken parts

• damaged electrical wiring

• any other condition that may

affect its safe operation.

2. aFtEr uSE, wipe external surfaces of the tool

with clean cloth. Also, clean the following after

every use, and as needed during extended use:

• Rails

• Water Tray (empty out sediment and water)

• Pump filter and housing

Item 64683

For technical questions, please call 1-888-866-5797.

3. Periodically, wear ANSI-approved

safety goggles and NIOSH-approved

breathing protection and blow dust out of

the motor vents using dry compressed air.

4. If Blade is out of alignment, Table does not

slide smoothly or other issues interfere with

smooth operation, have the Saw serviced by

a qualified technician before further use.

WarninG! if the supply cord of this

power tool is damaged, it must be replaced

only by a qualified service technician.

Page 15