HTC 420 VS 사용자 설명서 - 페이지 19
{카테고리_이름} HTC 420 VS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HTC 420 VS 46 페이지. Floor grinder | concrete floor sander
HTC 420 VS에 대해서도 마찬가지입니다: 매뉴얼 (50 페이지)
페이지 인쇄HTC 420 VS
3.2. Description of controls – Control
panel
The picture below shows the machines control panel:
Figure 3-3 Control panel
3.0
Power - Standby indicator: Indicates that the
1.
machines functions have been activated. Lit
when the Power knob (7) is turned to "I".
2.
Overload - Overload indicator: Lights up to
indicate that the machine is using too much
power. If this is ignored, the power supply to
the motor will be interrupted and an error code
generated.
Reset - Resetting the electronics: If the
3.
machine experiences an error, it may be
necessary to reset it. Turn the Grinding knob
(5) to "Reset" to reset all electronics. The
knob automatically returns to the central
position once it is released. Any error code is
shown on the display in the control cabinet.
4.
FWD - Forward: Turn the Grinding knob (5)
to "FWD" to start the machines grinding discs.
5.
Grinding - "Reset" (3) and "FWD" (4) knob.
Speed - Rotation speed: Regulates the rotation
6.
speed of the machine's grinding discs.
Machine description
11