HTC 420 VS 사용자 설명서 - 페이지 21
{카테고리_이름} HTC 420 VS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HTC 420 VS 46 페이지. Floor grinder | concrete floor sander
HTC 420 VS에 대해서도 마찬가지입니다: 매뉴얼 (50 페이지)
페이지 인쇄HTC 420 VS
4. Operation
4.1. General
The following section describes how to change tools and how to
operate the grinder. This section does not deal with the technical
aspects of grinding, such as selection of grinding tools, etc. For
choice of tools, see HTC's Product Catalogue under the Grinding
Guide tab.
Warning!
The machine may only be operated or repaired by personnel who
have completed the required practical and theoretical training
and who have read this manual thoroughly.
Warning!
Always use the machine in an environment where there is no risk
of explosion and fire. Find out and follow the relevant fire safety
regulations when grinding.
Warning!
Secure the area around the machine. No unauthorised persons
should be within a 15-metre radius of the machine. If loose objects
get under the grinding head, these may be flung out and cause
personal injury.
Warning!
Use safety equipment such as shoes with steel toecaps, goggles,
protective gloves, a mask and hearing protection.
Warning!
The machine may only be started with the grinding head lowered.
The rotating disc must be touching the floor and the right tool
must be fitted.
3.0
Operation
13