Bionaire BD20S-CN 지침 리플렛 - 페이지 4
{카테고리_이름} Bionaire BD20S-CN에 대한 지침 리플렛을 온라인으로 검색하거나 PDF를 다운로드하세요. Bionaire BD20S-CN 9 페이지. Digital dehumidifier
페이지 인쇄
F E AT U R E S - O P E R AT I O N S
Oscillating Function
Press the oscillation button to set the air oscillator to
oscillate automatically between 45 and 90 degrees. Press
again to select a stationary position for the air oscillator
at the desired angle between 45 and 90 degrees.
Humidity Control
When the unit starts, the humidity level of the
environment will be shown on the LCD display.
1. For automatic or whisper quiet modes, press the
humidity control buttons to select the desired
humidity level. The control allows you to adjust level
in 5% intervals from 40% to 80%.
Figure 1
A. Control Panel
(see Figure 2 for
close-up)
B. Air Oscillator
C. Handle
D. Air Intake Slats
E. Water Reservoir
F. Drain Plug
G. Water Level Pane
H. Drainage Hose
A
B
E
C
D
E
F
G
H
2. If the unit humidity level sensor detects humidity
levels in the environment that are lower than the
selected humidity level, the compressor will shut off
and the fan will work on low speed. The humidity
level of the environment must be higher than the
humidity level selected in order for the unit to start
operating again.
Figure 2
CONTROL PANEL (close-up)
J
I
N
O
I. Continuous Operation
Button
J. Timer Button
K. LCD Display (see
Figure 3 for close-up)
Figure 3
LCD DISPLAY (close-up)
P
P. Speed
Q. Water Reservoir Full
R. Continuous
Dehumidification
S. Timer
T. Oscillation
U. Automatic Defrost
L
K
M
L. Humidity Control
Buttons
M. On/Off Button
N. Oscillation Button
O. Auto Button
S
R
Q
W
V
X
V. Whisper Quiet
Automatic
Dehumidification
W. Automatic
Dehumidification
X. Ambient Temperature
Y. Ambient Humidity
Level
T
U
Y