Bionaire BD20S-CN 지침 리플렛 - 페이지 6

{카테고리_이름} Bionaire BD20S-CN에 대한 지침 리플렛을 온라인으로 검색하거나 PDF를 다운로드하세요. Bionaire BD20S-CN 9 페이지. Digital dehumidifier

페이지 인쇄

Trouble

• Dehumidifier

shuts off

automatically.

• Signal with 3 long

beep sounds

followed by 2

short ones, and

then the

dehumidifier

automatically

shuts off.

• EO Code on

Display.

• Appliance cycles

on/off.

• Warm air coming

from outlet grill.

T R O U b L E S H O O T I N G

TROUbLESHOOTING

Probable Cause

☛ Reservoir is full.

☛ The compressor starts to

malfunction during the operation.

☛ The unit's sensor detects the room

temperature is below 0 °C or

above 40 °C.

☛ The sensor malfunctions.

☛ This is normal operation when

using the automatic

dehumidification setting. The

humidistat within the appliance

adjusts to maintain your desired

comfort level. To run continuously,

select the continuous mode (see

operating instructions).

☛ Heat exchange while the

compressor is on.

Solution

✔ Follow Water Full Protection & Auto-Shutoff

instructions in this manual.

✔ Wait for 3 minutes and then restart the unit

again. If you wish to restart the unit without

waiting for 3 minutes, unplug it from the

electrical outlet and plug it again.

✔ Wait until room temperature is within safe

operating temperature (0-40 °C).

✔ Relocate your dehumidifier to another room

and operate normally. To restart the unit it

will be necessary to unplug it from the

electrical outlet and plug it back in.

✔ Restart the unit after troubleshooting.

✔ This is normal operation.