Alpha Digital T101 사용자 설명서 - 페이지 4

{카테고리_이름} Alpha Digital T101에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alpha Digital T101 8 페이지. Portable
Alpha Digital T101에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

If you use this product to change Bluetooth headsets, electronic watches or other products

with low power input, you need to turn on the low current output mode: double click the

button, and the LED display will flash. Please note that this mode must be manually closed by

pressing

button for 3 seconds. If you don t need this function, please close it in time.

PRODUCT INSTRUCTION

1) How to provide power for DC 12V appliances(such as head lamp, fan) with this product?

Plug your appliances to the 5.5mm x 2.5mm DC output port, press the

output. Long press the button for 3 seconds to switch off.

Notices: Please confirm whether your DC12V appliance support charging with 5.5mm x2 .5mm DC

header interface (The diameter of the DC Port of the Product is: 5.5mm),otherwise it is unableto

connect with the DC output, you can consult the electrical manufacturer, buy thecorresponding

adapter and connect with it.

5.5mm DC Jack for Fan or LED lights

(Current<10A, Peak current: 15A)

or charge car kits via DC to Cigarette Litghter

Connector

Support 5.5mm DC12V car kits with DC-Cigarette

Lighter Adapter, such as Vacuum Cleaner , Inflation

Pump,Electric wrench,fridge,etc. (Current<10A,

Peak current:15A

Protection Mode:

Short-circuit/Overpower Protection: If the DC output is short-circuited, the unit will shutdown to

protect itself. Please clear the problem and recharge the unit to recover from protection mode.

If the DC output is overpowered(Load(s) power> 150W) the unit will shutdown to protect itself

too, please unplug your device from the unit in time.

Note: The12V DC output voltage is range between 9V~12.5V, maximum output current is15A.

DC output voltage drops while battery capacity drops due to chemical characteristics of the

battery. If your appliance is not built-in input voltage stabilizing function, it may shutdown when

input voltage is too low, please unplug your device from the unit in time. Please charge the

unit in time.

"AC"

button to switch on DC