Alpha Digital T101 Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Fonte de alimentação Alpha Digital T101. Alpha Digital T101 8 páginas. Portable
Também para Alpha Digital T101: Manual de início rápido (2 páginas)
Imprimir páginaIf you use this product to change Bluetooth headsets, electronic watches or other products
with low power input, you need to turn on the low current output mode: double click the
button, and the LED display will flash. Please note that this mode must be manually closed by
pressing
"
"
button for 3 seconds. If you don t need this function, please close it in time.
PRODUCT INSTRUCTION
1) How to provide power for DC 12V appliances(such as head lamp, fan) with this product?
Plug your appliances to the 5.5mm x 2.5mm DC output port, press the
output. Long press the button for 3 seconds to switch off.
Notices: Please confirm whether your DC12V appliance support charging with 5.5mm x2 .5mm DC
header interface (The diameter of the DC Port of the Product is: 5.5mm),otherwise it is unableto
connect with the DC output, you can consult the electrical manufacturer, buy thecorresponding
adapter and connect with it.
5.5mm DC Jack for Fan or LED lights
(Current<10A, Peak current: 15A)
or charge car kits via DC to Cigarette Litghter
Connector
Support 5.5mm DC12V car kits with DC-Cigarette
Lighter Adapter, such as Vacuum Cleaner , Inflation
Pump,Electric wrench,fridge,etc. (Current<10A,
Peak current:15A
Protection Mode:
Short-circuit/Overpower Protection: If the DC output is short-circuited, the unit will shutdown to
protect itself. Please clear the problem and recharge the unit to recover from protection mode.
If the DC output is overpowered(Load(s) power> 150W) the unit will shutdown to protect itself
too, please unplug your device from the unit in time.
Note: The12V DC output voltage is range between 9V~12.5V, maximum output current is15A.
DC output voltage drops while battery capacity drops due to chemical characteristics of the
battery. If your appliance is not built-in input voltage stabilizing function, it may shutdown when
input voltage is too low, please unplug your device from the unit in time. Please charge the
unit in time.
'
3
"AC"
"
"
button to switch on DC