Dickson KT8P0 시작하기 - 페이지 4
{카테고리_이름} Dickson KT8P0에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Dickson KT8P0 8 페이지. Remote sensing temperature recorder
페이지 인쇄DIP SWITCH SETUP
DIP SWITCH SETUP
DIP SWITCH SETUP
DIP SWITCH SETUP
To setup the KT8 recorder for your specific
application, you might need to change some of
the Dip Switches. The Dip Switches are located
on the back of the unit. (Figure 3)
Use a pen or small screw driver to flip the
switches. Remember to install the correct chart
to match the corresponding Dip Switch setting.
Dip Switches for Ranges: : : :
Dip Switches for Ranges
Dip Switches for Ranges
Dip Switches for Ranges
Dickson KT8P Manual V6 52418
Reording Time
Reording Time
Reording Time
Reording Time
All the KT8 recorders feature usre selectable recording
times.
24-hour all models
7-day all models
31-day KT8P2/3 & KT856
o o o o
F/C
F/C
F/C
F/C
o
You can record in
switch #3.
o
F
o
C
Note: Remember to install the correct chart to match
corresponding switch setting.
Temperature Ranges
Temperature Ranges
Temperature Ranges
Temperature Ranges
o
0 to +100
F/C
o
-50 to +50
F/C
o
0 to +250
F/C
o
0 to +500
F/C
o
0 to +150
F/C
o
-20 to +20
F/C
o
0 to +1000
F/C*
o
0 to +2000
F/C*
* A203 High Temp Probe required - Range not available
on Model KT800
4
o
F or
C with the KT8 by using dip
#1 down
#2 up
#1 down
#2 down
#1 up
#2 up
#3 down
#3 up
#4 down
#5 down
#6 down
#4 down
#5 down
#6 up
#4 down
#5 up
#6 up
#4 up
#5 down
#6 down
#4 down
#5 up
#6 down
#4 up
#5 up
#6 up
#4 up
#5 down
#6 up
#4 up
#5 up
#6 down