Alpha Fan HANI-5B/36 LED 사용 설명서 - 페이지 4

{카테고리_이름} Alpha Fan HANI-5B/36 LED에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alpha Fan HANI-5B/36 LED 8 페이지.
Alpha Fan HANI-5B/36 LED에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지)

페이지 인쇄

Step 1

a. Route all the wires & Safety Wire from the Motor through the Fan Rod.

b. Fix the Fan Rod to the Motor Assembly with Bolt, Washer, Nut and tighten them firmly then insert

the Clevis Pin. Tighten the Fan Rod Support Screw.

c. Assemble the Coupling Cover, Canopy Cover, Canopy and the Notch Ball through the Fan Rod.

The diagram below shows the assembly of wires

through downrod

Current Carrying Wires

Insulating

Sleeve

Locking

Cross

Bolt

Motor

Locking

Shaft

Nut

Safety

Insulating

Earth

Sleeve

Cord

Wire

Earth

Wire

Safety

Wire

Notch

Ball

Canopy

Downrod

Cover

Coupling

Cover

Step 2

a. Drill the holes for 4 Expansion Screws and 1 Expansion 'J' Hook provided to the concrete

ceiling.

b. Align the slotted holes in the mounting bracket with the expansion screws and secure

with the washer and nuts

IMPORTANT : THE EXPANSION SCREWS, EXPANSION 'J' HOOK AND NUT MUST

BE TIGHTENED UNTIL SNUG.

Expansion Screw

Mounting Bracket

Step 3 -

a. Raise the fan and place the ball into the Mounting Bracket.

b. Align the notch on the Notch Ball with the indent in the mounting bracket

until you hear the notch pop into place.

c. Hook the Safety Wire onto the expension 'J' hook.

Mounting Bracket

Expansion 'J' Hook

Nut

Expansion

'J'

Indent

Notch

Ball

Safety Wire