Alpha Fan HANI-5B/36 LED Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Fan Alpha Fan HANI-5B/36 LED. Alpha Fan HANI-5B/36 LED 8 pages.
Also for Alpha Fan HANI-5B/36 LED: Instruction Manual (8 pages)

Print Page
Step 1
a. Route all the wires & Safety Wire from the Motor through the Fan Rod.
b. Fix the Fan Rod to the Motor Assembly with Bolt, Washer, Nut and tighten them firmly then insert
the Clevis Pin. Tighten the Fan Rod Support Screw.
c. Assemble the Coupling Cover, Canopy Cover, Canopy and the Notch Ball through the Fan Rod.
a.
b.
The diagram below shows the assembly of wires
through downrod
Current Carrying Wires
Insulating
Sleeve
Locking
Pin
Cross
Bolt
Motor
Locking
Shaft
Nut
Safety
Insulating
Earth
Sleeve
Cord
Wire
c.
Earth
Wire
Safety
Wire
Notch
Ball
Canopy
Canopy
Downrod
Cover
Coupling
Cover
4
Step 2
a. Drill the holes for 4 Expansion Screws and 1 Expansion 'J' Hook provided to the concrete
ceiling.
b. Align the slotted holes in the mounting bracket with the expansion screws and secure
with the washer and nuts
IMPORTANT : THE EXPANSION SCREWS, EXPANSION 'J' HOOK AND NUT MUST
BE TIGHTENED UNTIL SNUG.
Expansion Screw
Mounting Bracket
Step 3 -
a. Raise the fan and place the ball into the Mounting Bracket.
b. Align the notch on the Notch Ball with the indent in the mounting bracket
until you hear the notch pop into place.
c. Hook the Safety Wire onto the expension 'J' hook.
Mounting Bracket
Expansion 'J' Hook
Nut
Expansion
'J'
Indent
Notch
Notch
Ball
Safety Wire
5