Dictator DICTAMAT 50 WS-MFL 기술 매뉴얼 - 페이지 15

{카테고리_이름} Dictator DICTAMAT 50 WS-MFL에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dictator DICTAMAT 50 WS-MFL 17 페이지.

2) Adjusting the Closing
Speed
© DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 201906
D) Adjusting the Closing Force and Speed - cont.
In order to adjust the closing speed open the door completely.
Now adjust the closing speed during the closing of the door by turning the
adjustment screw on the radial damper (Allen key 5.5 mm) (see ill. 34).
Turning clockwise:
Turning anticlockwise:
In total 15 revolutions are possible between the minimum and the maximum
damping. In the factory the damper is set to a medium damping.
Adjustment screw
for the closing speed
Now check whether the spring closes the door out of any open position,
independent from how far the door had been opened. If necessary,
increase the tension of the spring or reduce the damping.
IMPORTANT: Tension the spring only when the door is completely open!
Technical Manual
DICTAMAT 50 WS-MFL
reduces the closing speed
increases the closing speed
Page D50WS-MFLHB.015
Ill. 34