Epever SHI3000 사용자 설명서 - 페이지 12

{카테고리_이름} Epever SHI3000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epever SHI3000 20 페이지. Shi series pure sine wave inverter

heating. And it automatic restarts when the temperature recovers to

the normal level.



Others

Saving Mode

When the switch is on "Saving" side, the inverter will enter into the

Saving Mode. It will shut off the output if the loads value is less than

50VA. Then restart and detect the power of the load again after 10s.

If the load is more than 50VA, the inverter will turn on the output.

Otherwise it will shut off output again. It cycles like this. So please

don‟t use the saving mode if the load is smaller than 50VA.

Mode Switch

The output mode can be changed by the mode switch. When the

switch No.1 is on the ON side, the inverter will enter into the saving

Mode. This mode can be switched online.

When the switch No.2 is on the ON side, the output voltage is

230Vac, otherwise is 220Vac.When the switch No.3 is on the ON

side, the output frequency is 60Hz，otherwise is 50Hz. Both the

output frequency and the output voltage change availability after

restart the inverter.