Axis 290A 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} Axis 290A에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis 290A 8 페이지. Outdoor housing
Axis 290A에 대해서도 마찬가지입니다: 설치 매뉴얼 (4 페이지)

Maintenance

Annual maintenance is required to inspect all visible seals for wear and damage. Worn or

damaged seals should be replaced.

Recommendation:

from drying out and to aid opening and closing of the housing. Use an all-purpose silicone

spray for use on electrical equipment and components, and also compatible with rubber,

metal and plastic materials.

Clean the housing with a damp cloth only (not on the window). Do not use chemicals to

clean the housing as this may affect the powder coat finish. The window should only be

cleaned with a dry cloth.

Burnt fuses in the fused terminal block can be replaced to reinstate the power supply of the

camera. Use a 5A, 250 VAC fuse and ensure that the mains is disconnected before

beginning.

• Weatherproof to IP66

• CE

• Power requirement: 100-240V AC 60/50Hz

• Operating temperature: -20°C to +42°C (-4F to 108F).

• Approximate weight: 3.2 kg (7.1 lbs)

• Color: RAL 9002 grey white

• Specifications may change without prior notice.

Warning: The housing should not be installed in areas that are subject to many hours of direct sunlight as

this may overheat and damage the camera beyond repair. The maximum temperature inside the housing

should never exceed 50°C (122F).

290A Installation Instructions

Treat all visible seals with silicone at least once a year to prevent them

INSTAL GUIDE HOUSING ENV WHITE r3.1

January 2007