Alpha Professional Tools Spark Buster 사용 설명서 - 페이지 8

{카테고리_이름} Alpha Professional Tools Spark Buster에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alpha Professional Tools Spark Buster 16 페이지. Spark protection cover

페이지 인쇄

INSTallaTION Of ThE SPaRK PROTECTION COVER

1. Be sure to turn off the variable-speed angle grinder and remove the

plug from the electrical outlet before attaching and installing the Spark

Protection Cover.

2. Make sure the Spark Protection Cover is securely attached; otherwise it

may come loose which could cause injury.

3. If you installed the Spark Protection Cover to a variable-speed angle

grinder but the connector is loose and can not be securely attached, do not

use the Spark Protection Cover. Using it in this state could cause injury.

INSTallING TO alPha

aNGlE GRINDER

1. Dismantle the original safety guard from the variable-speed angle

grinder.

2. Remove the screws from the head of the grinder.

3. Turn the grinder body to move the switch (SW) to the upper position.

(Switch should not touch the workpiece)

4. Re-tighten the screws to secure.

WaRNING!

, MaKITa

OR MIlWaUKEE VaRIaBlE-SPEED

figure-4