Alpha Professional Tools Spark Buster Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do elektronarzędzi Alpha Professional Tools Spark Buster. Alpha Professional Tools Spark Buster 16 stron. Spark protection cover
INSTallaTION Of ThE SPaRK PROTECTION COVER
1. Be sure to turn off the variable-speed angle grinder and remove the
plug from the electrical outlet before attaching and installing the Spark
Protection Cover.
2. Make sure the Spark Protection Cover is securely attached; otherwise it
may come loose which could cause injury.
3. If you installed the Spark Protection Cover to a variable-speed angle
grinder but the connector is loose and can not be securely attached, do not
use the Spark Protection Cover. Using it in this state could cause injury.
INSTallING TO alPha
aNGlE GRINDER
1. Dismantle the original safety guard from the variable-speed angle
grinder.
2. Remove the screws from the head of the grinder.
3. Turn the grinder body to move the switch (SW) to the upper position.
(Switch should not touch the workpiece)
4. Re-tighten the screws to secure.
8
WaRNING!
, MaKITa
OR MIlWaUKEE VaRIaBlE-SPEED
®
®
figure-4