DieHard 200.71988 운영자 매뉴얼 - 페이지 13
{카테고리_이름} DieHard 200.71988에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DieHard 200.71988 16 페이지. Jump starter/dc power source air compressor, inflator and ac power
DieHard 200.71988에 대해서도 마찬가지입니다: 운영자 매뉴얼 (15 페이지)
페이지 인쇄
16.
POwERINg A 110v AC DEvICE
To operate a 110V AC device:
16.1
Open the protective cover of the AC power outlet on the front panel of the
Portable Power 1150.
16.2
Plug the 110V AC device into the AC power outlet, and place the Inverter/
Compressor Switch in the INVERTER position.
16.3
If the device does not operate properly when first connected to the in-
verter, push the inverter rocker switch ON (I), OFF (0), and ON (I) again
in quick succession. If this procedure is not successful, it is likely that the
1150 inverter does not have the required capacity to operate the device
intended.
16.4
Charge the Portable Power 1150 as soon as possible after each use.
CAUTION: Incorrect operation of your inverter may result in damage and
personal injury. The inverter output is 110V AC and can shock or electro-
cute the same as any ordinary household AC wall outlet.
17.
110v AC ELECTRICAL DEvICE ExAMPLE RUN-TIME CHART
Spotlights, Sump Pumps, DVD Players
Faxes, TVs, Small Power Tools
Computer Printer, Medium Power Tools, Blenders
The maximum continuous load is 400 watts.
*NOTE: Estimated run-times. Actual time may vary. Times are based on
the internal battery being new, fully charged and operated at room tem-
perature.
Appliance Type
Estimated
100 Watts
150 Watts
200 Watts
10
•
•
Estimated
Power
Time*
1.5 Hours
1.25 Hours
55 Minutes