DieHard Portable Power 1150 운영자 매뉴얼 - 페이지 8
{카테고리_이름} DieHard Portable Power 1150에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DieHard Portable Power 1150 15 페이지. Diehard portable power 1150 battery charger operator's manual
DieHard Portable Power 1150에 대해서도 마찬가지입니다: 소유자 매뉴얼 (11 페이지), 운영자 매뉴얼 (16 페이지), 운영자 매뉴얼 (12 페이지), 운영자 매뉴얼 (17 페이지)
페이지 인쇄
5.2
12V DC Electrical
Device Example Run=Time Chart
Appliance
Type
Estimated
Power
Estimated
Time*
Fluorescent
Lights, Cellular Phones
4 Watts
50 Hours
Radios, Depth Finders,
Fans
9 Watts
25 Hours
Camcorders,
DVD Players,
Spotlights
15 Watts
13 Hours
Electrical
Tools, Bilge Pumps
24 Watts
7.3 Hours
Electric Coolers
48 Watts
4.5 Hours
Air Compressors,
Car Vacuums
80 Watts
2 Hour
*NOTE: Estimated run-times. Actual time may vary. Times are based on
the internal battery being new, fully charged and operating at room tem-
perature.
The USB port on the 1150 provides up to 500mA at 5VDC.
7.1
Turn the JUMP START ON/OFF switch to the ON position.
7.2
Plug the device into the USB port on the front panel of the 1150.
7.3
Turn USB device ON.
7.4
Reverse these steps when finished using the USB port.
8.1
8.2
8.3
8.4
Position the 1150 on a flat, stable surface near the intended work area.
Push the power switch to the LIGHT position. The light will turn on and
illuminate your work area.
NOTE: With a fully charged internal battery, the built-in light should pro-
vide 18 to 30 hours of continuous, useful light.
Push power switch to the OFF position when work is completed.
Charge the 1150 as soon as possible after using the built-in light.
NOTE: With a fully charged internal battery, the built-in light should
provide 18 to 26 hours of continuous useful light, depending on ambient
conditions.
.6.