Acculaim Dyna Drum HO 사용자 설명서 - 페이지 9

{카테고리_이름} Acculaim Dyna Drum HO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acculaim Dyna Drum HO 20 페이지.

Control

The control cord has five cores

to provide DMX512-A input and

output connections:

When connecting multiple fixtures, connect the DMX control input lines to the first fixture

and feed the output of that fixture to the next. The final fixture in the line should have a

120Ω terminating resistor connected between the DMX + and DMX – lines:

Tips for achieving successful DMX control

• Do not exceed a total cable length of 3,900 ft (1200m) without buffering.

• Do not exceed a total of 32 fixtures on a single line without buffering.

• Use only connection cables with a characteristic impedance of 120Ω, preferably where

the DMX + and DMX – data lines are twisted around each other and the ground link exists

as a coaxial screen surrounding the inner cores.

• Connect a 120Ω terminating resistor between the DMX + and DMX – output connections

of the final fixture.

• Do not introduce a passive Y-split into the control cabling. If it is necessary to split the

control link in order feed fixtures located in different directions, use a powered DMX

splitter/buffer.

• Ensure that the DMX + and DMX – connections do not become crossed at any point.