Acculaim Dyna Drum HO QW 사용자 설명서 - 페이지 15

{카테고리_이름} Acculaim Dyna Drum HO QW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acculaim Dyna Drum HO QW 20 페이지.

페이지 인쇄

Setting the DMX address

When external control is used, the DMX start address of the fixture needs to match the start

address being used by the controlling device. Color fixtures use four DMX channels (for Red,

Green, Blue and White), beginning with the one chosen here; white-only models use just

one DMX channel.

To set the DMX address

1 Enter the user menu (see page 8).

to choose the Addr item.

2 Press

ENTER

3 Use the

and

Note: Do not set a DMX address higher than 509 for color models.

4 Press

to save. The DMX start address is now fixed.

ENTER

Note: When a valid DMX input is attached to the Dyna Drum HO fixture it will override any

internal color/chase settings; additionally, the user display will show the configured DMX address.

Setting the keylock

The keylock can help to deter unauthorized access to the menu by requiring a passcode

number to be entered. Two menu items are used to configure the keylock: LoC and PASS.

Note: Be sure to set the PASS option before enabling the LoC so that you know the code.

To set the keylock

1 Enter the user menu (see page 8).

2 Select the PASS menu item.

3 Use the

and

4 Press

ENTER

to save.

5 Select the LoC menu item.

6 Use the

7 Press

ENTER

to save. The keylock is now active.

Note: To deactivate the keylock feature, enter the Loc menu item and choose the oFF option.

To enter the menu when keylock is enabled

1 When you enter the user menu and keylock is enabled, the display will show 0.

2 Use the

and

. If the entered passcode is correct, the menu will show ADDr; if not, it will

3 Press

ENTER

return to show 0 so that you can try again.

To gain backdoor access if the passcode is unknown

The backdoor passcode is 123. If your passcode is unknown or forgotten, use the method

above but enter 123 and press

buttons to choose a start address from 1 to 512.

buttons to choose a passcode number between 0 and 9999.

button to choose the on option.

buttons to display the previously set passcode number.

ENTER

to gain access.