Acculaim Dyna Drum HO QW 사용자 설명서 - 페이지 17

{카테고리_이름} Acculaim Dyna Drum HO QW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acculaim Dyna Drum HO QW 20 페이지.

Further information

No light output is visible when expected.

• Check that power is correctly applied to the fixture and that there is no damage to the

power input cord.

• Use the menu to perform an emitter test.

• Use the menu to check the internal temperature of the fixture.

• If external DMX control is being used, check that the DMX address set within the fixture

matches that being output by the controlling source device.

• If external DMX control is being used, check the DMX output near to the source to

confirm a valid signal is being originated. When a valid DMX input is attached to the Dyna

Drum HO fixture, the user display will show the configured DMX address.

• If external DMX control is being used, check that the DMX + (hot) and DMX - (cold) lines

have not been crossed.

• If solo mode is being used, check that the static color, white-only output or color chase

has been correctly programmed and that the appropriate solo mode is selected (see

pages 11 and 12).