AXITEC AC-290M/60S 설치 매뉴얼 - 페이지 5

{카테고리_이름} AXITEC AC-290M/60S에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AXITEC AC-290M/60S 17 페이지.

3.4.

Roof mount

When installing a module on a roof or building, ensure that it is securely fastened and cannot fall as

a result of wind or snow loads. Provide adequate ventilation under a module for cooling (10cm

minimum air space between module and mounting surface). Slope should be less than 5 in/ft (127

mm/305 mm) required to maintain a fire Class rating.

When installing module on a roof, ensure that the roof construction is suitable. In addition, any roof

penetration required to mount the module must be properly sealed to prevent leaks. In some cases,

a special support frame may be necessary. The roof installation of solar modules may affect the

fireproofing of the house construction.

The fire rating of this module is valid only when mounted in the manner specified in the mechanical

mounting instructions. The modules are rated fire Class C, and are suitable for mounting over a class

A roof. When installing the module on a roof or building, do so in calm winds. Installing a module

during strong winds may cause accidents.

The System Fire Class Rating of the module or panel in a mounting system in combination with a

roof covering complete with requirements to achieve the specified System Fire Class Rating for a

non-BIPV module or panel. Any module or panel mounting system limitations on inclination

required to maintain a specific System Fire Class Rating.

3.5.

Pole mount

When installing a module on a pole, choose a pole and module mounting structure that will

withstand anticipated winds for the area.

Installation Manual

Page 4 / 16