AXITEC AC-290M/60S Installation Manual - Page 5
Browse online or download pdf Installation Manual for Inverter AXITEC AC-290M/60S. AXITEC AC-290M/60S 17 pages.
Print Page3.4.
Roof mount
When installing a module on a roof or building, ensure that it is securely fastened and cannot fall as
a result of wind or snow loads. Provide adequate ventilation under a module for cooling (10cm
minimum air space between module and mounting surface). Slope should be less than 5 in/ft (127
mm/305 mm) required to maintain a fire Class rating.
When installing module on a roof, ensure that the roof construction is suitable. In addition, any roof
penetration required to mount the module must be properly sealed to prevent leaks. In some cases,
a special support frame may be necessary. The roof installation of solar modules may affect the
fireproofing of the house construction.
The fire rating of this module is valid only when mounted in the manner specified in the mechanical
mounting instructions. The modules are rated fire Class C, and are suitable for mounting over a class
A roof. When installing the module on a roof or building, do so in calm winds. Installing a module
during strong winds may cause accidents.
The System Fire Class Rating of the module or panel in a mounting system in combination with a
roof covering complete with requirements to achieve the specified System Fire Class Rating for a
non-BIPV module or panel. Any module or panel mounting system limitations on inclination
required to maintain a specific System Fire Class Rating.
3.5.
Pole mount
When installing a module on a pole, choose a pole and module mounting structure that will
withstand anticipated winds for the area.
Installation Manual
Page 4 / 16