Olympus Camedia D-230 빠른 시작 매뉴얼

{카테고리_이름} Olympus Camedia D-230에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus Camedia D-230 2 페이지. Olympus auto-connect software: connection guide
Olympus Camedia D-230에 대해서도 마찬가지입니다: 연결 매뉴얼 (9 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

QUICK START GUIDE

Thank you for purchasing an Olympus digital camera.

Please read the operation manual supplied with the camera carefully before using

your camera. We recommend that you become familiar with your camera by taking

a number of test shots before performing important shooting.

I PACKAGE CONTENTS

Check that your digital camera comes complete with the items listed below in the specified

quantities.

Digital camera ..................................................................................................... 1

Strap ................................................................................................................... 1

AA Alkaline batteries ........................................................................................... 2

SmartMedia card (16MB) .................................................................................... 1

USB cable ........................................................................................................... 1

CD-ROM (CAMEDIA Master and reference manual) ......................................... 1

Quick Start Guide ............................................................................................... 1

Basic Manual ...................................................................................................... 1

Warranty Card .................................................................................................... 1

I NAMES OF PARTS

3 4

1 Shutter button

8 Connector cover

2 Lens barrier

9 USB connector

3 Flash

0 DC-IN jack

4 Lens

A Monitor

5 Self-timer lamp

B Viewfinder

6 Card cover

C Orange lamp

7 Strap eyelet

D Green lamp

I ATTACHING THE STRAP

1 Pass the short end of the strap through the strap eyelet.

2 Pass the long end of the strap through the loop.

3 Pull tight and check that it is securely attached.

I LOADING THE BATTERIES

Check that the lens barrier is closed and both the monitor and the orange lamp are

off.

Caution

➜

1 Slide the battery compartment cover toward A and lift it up in the direction of B.

2 Insert the batteries as shown, making sure that they are correctly oriented.

3 Push down the battery compartment cover in the direction of the arrow C and close

firmly in the direction of D until it clicks.

DIGITAL CAMERA

C-2

D-230

E Arrow pad

F Tripod socket

G Monitor button

H OK/Menu button

I Battery compartment

cover

➜

I INSERTING THE SMARTMEDIA CARD

Check that the lens barrier is closed and both the monitor and the orange lamp

are off.

Caution

1 Open the card cover.

2 Insert the card in the direction shown in the figure.

There is a mark inside the card cover, indicating the direction in which the card should

be inserted.

3 Close the card cover securely until it clicks.

I SETTING THE DATE AND TIME

1 Press the

button to turn the monitor on.

2 Press the

button to display the menu.

3 Select [SETUP] using the

4 Select [

] using the

5 Select the date format "Y-M-D (Year-Month-Day)", "M-D-Y (Month-Day-Year)" or "D-

M-Y (Day-Month-Year)" using the

6 Set the first figure using the

using the

button.

7 Repeat the above procedure until the date and time settings are adjusted.

8 Press the

button when the clock reaches 00 seconds.

9 Press the

button to turn the monitor off.

I TAKING PICTURES

To turn the camera on : Open the lens barrier. (You are now ready to take pictures.)

To turn the camera off : Close the lens barrier.

Never attempt to open the card cover or remove the card or batteries while the

orange lamp is blinking. Otherwise, the image data on the card may be destroyed.

Caution

Remember that it is impossible to restore image data once it has been destroyed.

Press the shutter button halfway A and then press it fully B.

Note

FLASH (

1 Open the lens barrier.

2 Check the current flash mode by pressing the

3 To change the setting, press the

Setting of the flash mode is completed.

Flash mode settings

Note

Auto (AUTO)

Red-eye (

)

Fill In ( )

Flash Off (

)

Night Scene (

Night Scene/Red-eye (

MACRO (

)

This mode is for taking close-up pictures at distance of 10cm-50cm (4in-1.6ft).

1 Open the lens barrier and press the

2 Press the

button again to set the Macro (

3 Take a picture by looking at the monitor.

DIGITAL TELE

This mode enables you to take pictures in six magnifications: 1.6×, 2×, 2.5×, 3.2×, 4× and 5×.

1 Open the lens barrier and press the

2 The image is magnified in the sequence [1.6× → 2.0× → 2.5× → 3.2× → 4.0× → 5.0×]

each time the

button is pressed.

The image is zoomed out in the sequence [4.0× → 3.2× → 2.5× → 2.0× → 1.6× →

OFF] each time the

3 Take a picture by looking at the monitor.

The image quality needs to be set to SQ2 to magnify 3.2×, 4× or 5×.

Note

SELF-TIMER ( )

1 Press the

button with the lens barrier open to display the Camera menu.

2 Select [CAMERA] using the

3 Select [DRIVE] using the

4 Select [

SELF-TIMER] using the

5 Press the

button again to exit the menu.

6 Press the shutter button.

The self-timer lamp on the front of the camera lights up for 10 seconds and then blinks

for 2 seconds, before the picture is taken.

➜

Card

insertion

direction

marking

buttons and press the

button.

buttons and press the

buttons, and then proceed to the next figure

➜

)

button.

button until the appropriate flash mode is displayed.

Automatically fires in low light or backlight

conditions.

Reduces the phenomenon of the subject's eyes

appearing red in the image.

Fires regardless of the light conditions.

Does not fire even in dark conditions.

)

For taking pictures at night.

)

For taking pictures of people against a night

background.

button to display the current setting [OFF].

) mode.

button to turn the monitor on.

button is pressed.

buttons and press the

button.