Olympus Camedia D-230 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Olympus Camedia D-230에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus Camedia D-230 2 페이지. Olympus auto-connect software: connection guide
Olympus Camedia D-230에 대해서도 마찬가지입니다: 연결 매뉴얼 (9 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

SEQUENCE MODE (

)

1 Press the

button with the lens barrier open to display the Camera menu.

2 Select [CAMERA] using the

3 Select [DRIVE] using the

4 Select [

SEQUENCE] using the

5 Press the

button again to exit the menu.

6 Take pictures. (Picture-taking continues while the shutter button is pressed and stops

when the button is released.)

EXPOSURE COMPENSATION

This mode enables you to change the brightness of the image. (Compensation of ±2 in

0.5 steps)

1 Press the

button with the lens barrier open to display the Camera menu.

2 Select [CAMERA] using the

3 Select [

] using the

4 Adjust the compensation using the

(to brighten image), and press the

5 Press the

button again to exit the menu.

6 Take a picture.

METERING MODE (

1 Press the

button with the lens barrier open to display the Camera menu.

2 Select [CAMERA] using the

3 Select [

] using the

4 Select the Metering mode setting using the

5 Press the

button again to exit the menu.

6 Take a picture.

Metering mode settings

Note

ESP (

)

The camera measures the light at the center of the

viewfinder and around the periphery of the picture

separately and then selects the optimal exposure.

SPOT (

)

The camera measures the light levels only at the center

of the viewfinder, allowing you to obtain the correct

exposure for backlight subjects since the exposure is not

affected by the background light.

WHITE BALANCE (

1 Press the

button with the lens barrier open to display the Camera menu.

2 Select [PICTURE] using the

3 Select [

] using the

4 Select the white balance setting using the

5 Press the

button again to exit the menu.

6 Take a picture.

White balance settings

Note

Auto (AUTO)

Clear sky (

)

Cloudy sky (

)

Incandescent Lamp (

) Under incandescent lighting.

Fluorescent Lamp (

) Under fluorescent lighting.

IMAGE QUALITY (SHQ, HQ, SQ1, SQ2)

1 Press the

button with the lens barrier open to display the Camera menu.

2 Select [PICTURE] using the

3 Select [

] using the

4 Select the image quality setting using the

5 Press the

button again to exit the menu.

6 Take a picture.

Image quality settings (pixel size)

Note

SHQ (1600 × 1208)

For best print quality.

HQ (1600 × 1200)

For good print quality with small print size.

SQ1 (1024 × 768)

For e-mail attachments or small print size.

SQ2 (640 × 480)

For e-mail or web use.

I PLAYING BACK IMAGES

To turn the monitor on : Press the

To turn the monitor off : Press the

•

button : Displays the previous image.

Note

•

button : Displays the next image.

•

button : Displays several images. Press the

image.

If you press the

moves to the previous image, and if you press the

to the next image.

button : Magnifies the image (1.5× → 2× → 2.5× → 3×). Press the

•

to return to 1×.

If you press the

is enabled.

Press the

or right.

Press the

buttons and press the

button.

buttons and press the

button.

buttons and press the

button.

buttons and press the

button.

button (to darken image) and the

button.

)

buttons and press the

button.

buttons and press the

button.

buttons and press the

)

buttons and press the

button.

buttons and press the

button.

buttons and press the

The white balance is controlled automatically.

In outdoors under a clear sky.

In outdoors under a cloudy sky.

buttons and press the

button.

buttons and press the

button.

buttons and press the

button with the lens barrier closed to turn the monitor on.

button again to turn the monitor off.

button to return to display an

button in the index playback, the green frame

button while magnifying the image, scroll mode

buttons to move the image up, down, left

button again to exit scroll mode.

ERASING AN IMAGE

1 Display the image you want to erase.

2 Press the

3 Select [

The selected image is erased.

button.

ERASING ALL IMAGES

1 Press the

2 Press the

3 Select [SETUP] using the

4 Select [

5 Select [

6 Select [

All the images are erased.

Once erased, images cannot be restored. Check the image before erasing to avoid

button

accidentally erasing image you want to keep.

Caution

PROTECT (

1 Display the image you want to protect.

2 Press the

Protected images cannot be erased by "Erasing an image" or "Erasing all images",

but they are erased by formatting the card.

Caution

To cancel the protect setting, display the image with the

Note

button.

I RECORDING/PLAYING BACK MOVIES ( )

Recording movies

1 Press the

2 Select [CAMERA] using the

3 Select [DRIVE] using the

4 Select [

5 Press the

6 Record movies by looking at the monitor. (Press the shutter button to start recording

movies. Recording stops when the shutter button is pressed again.)

The movie mode is cancelled when the monitor is turned off by pressing the

Note

button.

Playing back movies

1 Press the

button.

Display the movie with the

2 Press the

3 Select [PLAY] using the

4 Select [

5 Select [START] using the

The movie is played back.

I MUTING THE BEEP TONES

1 Press the

2 Select [SETUP] using the

3 Select [

4 Select [OFF] using the

5 Press the

button.

Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000

Technical Support (USA):

24/7 online automated help: http://support.olympusamerica.com

Phone customer support: Tel. 1-888-553-4448 (Toll-free)

Our Phone customer support is available from 8 am to 10 pm (Monday to Friday) ET

E-Mail: [email protected]

Olympus software updates can be obtained at: http://olympus.com/digital/

(Premises/Goods delivery) Wendenstraße 14-18, 20097 Hamburg, Germany. Tel. 040-237730

(Hotline Numbers for customers in Europe)

Tel. 01805-67 10 83

button, it moves

Tel. 00800-67 10 83 00

button

Tel. +49 180 5-67 10 83

Tel. +49 40-237 73 899

Our Hotline is available from 9 am to 6 pm (Monday to Friday)

(E-Mail) [email protected]

Printed in Japan

1AG6P1P1146--

button for more than 1 second to display the Erase menu.

ERASE] using the

buttons and press the

button with the lens barrier closed.

button to display the Play menu screen.

buttons and press the

] using the

buttons and press the

ALL ERASE] using the

)

button for more than 1 second. The

button for more than 1 second.

button with the lens barrier open to display the Camera menu.

buttons and press the

MOVIE] using the

buttons and press the

button again to exit the menu. The monitor will turn on.

button with the lens barrier closed.

symbol indicated.

button to display the Play menu.

buttons and press the

] using the

buttons and press the

button and press the

button with the lens barrier open to display the Camera menu.

buttons and press the

] using the

buttons and press the

button again to exit the menu.

OLYMPUS AMERICA INC.

OLYMPUS OPTICAL CO.(EUROPA) GMBH.

(Letters) Postfach 10 49 08, 20034 Hamburg, Germany.

for Germany

for Austria, Belgium, Denmark, France, Netherlands, Norway,

Sweden, Switzerland, United Kingdom

for Finland, Italy, Luxemburg, Portugal, Spain, Czech

Republic

for Greece, Croatia, Hungaria and the Rest of Europe

button.

buttons and press the

button.

buttons and press the

button.

symbol is displayed.

symbol and press the

button.

VT296801