AXITEC 60-CELL 설치 매뉴얼 - 페이지 9

{카테고리_이름} AXITEC 60-CELL에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AXITEC 60-CELL 12 페이지. Solar modules

3.4

MOUNTING WITH CLAMPS

It is the installer's responsibility to ensure that the clamps used to attach the module are strong enough.

Figure 4 shows the module mounted with clamp.

Module

frame

Clamp

The clamps must not be in contact with the front glass or deform the frame in any way. Avoid shading

effects from the clamps and mounting system.

3.5



All module frames and mounting racks must be properly grounded in accordance with the appropriate

respective National Electrical Code.



Proper grounding is achieved by bounding the module frame and all metallic structural members

together continuously using a suitable grounding conductor. The grounding conductor or strap may be

copper, copper alloy or other material acceptable for use as an electrical conductor per respective

National Electrical Codes. The grounding conductor must make a connection to earth using a suitable

earth ground electrode.

4.1



All wiring should be done in accordance with applicable local electrical codes.

Figure 4

AXITEC INSTALLATION – USA 170727

9/12