Olympus SC50 설치 매뉴얼 - 페이지 25
{카테고리_이름} Olympus SC50에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus SC50 34 페이지. Optical microscope accessory. cmos color camera.
페이지 인쇄
6.3.2
The graphic card's driver is outdated
Problem: The graphic card's driver is outdated.
Solution: Check your graphic card's driver in the Device Manager and install an
update if it's outdated. Do the following:
1)
2)
3)
4)
5)
6.3.3
The power saving mode in the BIOS prevents image acquisition
Problem: In your computer's BIOS, a power saving mode is switched on which
prevents the transmission of the image data from the camera.
Solution: If possible, switch off all power saving modes in the BIOS of your
computer. Contact your administrator if you can't change these settings yourself.
However, it may be that the BIOS of your computer does not allow the deactivation
of the power saving mode. In this case, please contact Olympus Soft Imaging Solu-
tions Customer Service.
Changes in the BIOS only by authorized and qualified personnel
Changes in the BIOS (Basic Input Output System) can have a negative effect on
the way your computer operates.
Make sure that only qualified personnel make changes to the settings in the BIOS.
The
OSIS Power Profile
Configurator
This service is started automatically when the computer is switched on.
When you start the Olympus or Olympus Soft Imaging Solutions' software, this
service controls your computer's power saving modes.
Open the Device Manager.
Depending on the operating system you use, opening the Device Manager
is done in different ways. If required, refer to your operating system's online
help for further information on the Device Manager.
Double click the
Display adapters
A subentry with your graphic card's name appears.
Double click this subentry.
A dialog box containing the graphic card's properties opens.
Click the
Driver
tab.
The driver type, the manufacturer and the driver date are displayed.
We recommend that you run an update if your driver is more than two years
old. Find a suitable download in the Internet.
Should you have a graphic card from NVIDIA, go to www.nvidia.com.
Should you have a graphic card from ATI, go to www.ati.com. Download the
"Catalyst Control Center" software which contains the driver.
Should you have a graphic card from another manufacturer, search for the
address in the Internet.
OSIS Power Profile Configurator
entry.
service is installed together with the software.
6 Troubleshooting
25