AccuLine 40-6537 서비스 매뉴얼 - 페이지 6
{카테고리_이름} AccuLine 40-6537에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AccuLine 40-6537 15 페이지. Auto-leveling rotating laser
AccuLine 40-6537에 대해서도 마찬가지입니다: 사용 설명서 (18 페이지)
페이지 인쇄
2.5 Base Assembly (AP1942)
Item JLT Part #
7.1
AP1690
ST2.9 x 10 Cross Plate Tapping
Screw
7.2
AP1985
Cover
7.3
AP1986
#10 Connecting PCB
7.4
AP1987
Bottom Seat Assembly
7.5
AP1988
Feeler Part
1.
Disassemble Cover (7-2) by removing 5 retaining screws (7-1)
2.
Remove #10 Connecting PCB (7-3) by sliding it out of the guide
slot of the Bottom Seat Assembly (7-4).
3.
Disassemble Bottom Seat Assembly (7-4) by desoldering the
wires of 2 Feeler Parts (7-5). Press out Feeler Parts as required.
3.0 Calibration
Calibration is a process that is used to correct for accuracy and/or functional errors above and beyond those stated in
published specifications. While Manual-leveling, Self-leveling, and Automatic-leveling (motor driven) devices have
different mechanisms that require calibration, there are similarities with optics that is consistent regardless of the
leveling mechanism. This section of the service manual discusses calibrations specific to the 40-6537. Each item
discussed is shown below.
3.1 Horizontal Mode Operation
3.1.1 Quantifying Accuracy Error
3.1.2 Characterize the type of error
3.1.2.1 Oblique Error
3.1.2.2 Taper Error
3.1.2.3 Wave Error
3.2 Vertical Mode Operation
3.3 Leveling Range Alarm Calibration
Prepared By: Tim Wojo
Description
Qty
5
1
1
1
2
Revision - Date: 0 – 03232009
40-6537 Service Manual
Page 6 of 15