Olympus XZ-1 팁과 요령 매뉴얼 - 페이지 7

{카테고리_이름} Olympus XZ-1에 대한 팁과 요령 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus XZ-1 30 페이지. Body black
Olympus XZ-1에 대해서도 마찬가지입니다: 사양 (5 페이지)

XZ-1 Tips

page 7 of 29

as long as the camera and flash are NOT in daylight coming in from a window. To

photograph a room with daylight coming in from a window, use M Manual mode with the

shutter at, say, 1/250. Get a correct exposure from the window (the rest of the room will

go black). Then, with the XZ-1 flash on 1/4 power, have it set off the slave flash -- with

the slave flash bouncing light off the ceiling, or hidden behind a chair.

On the LCD screen, if the room now looks too bright or too dark, adjust the Aperture...

NOT the Shutter speed. Because since the flash fires at faster than 1/2000 of a second,

your shutter speed setting is only meaningful for that window-daylight exposure setting.

The interior room part of the exposure is controlled by the flash, and changing the

aperture is the only way to add or take away light from the room.

http://www.amazon.com/Strobist-

Get an inexpensive set of Rosco color gels...

Collection-Cinegel-Filter-Strobes/dp/B002SWIOOM

... and a gel holder

http://www.gelholder.com/gelholder/

(works great with the YN460N) and you are,

instantly at super-low cost ... starting to light like a pro!

http://strobist.blogspot.com/

Great resource -- Strobist website, see their 'Lighting 101'.

Radio-controlled Wireless Slave Flash

-- post on Dpreview by Echelon 2004

Using the XZ-1 with a Cactus V4 radio transmitter to set off Nikon SB-900 speedlights...

It's very easy. Use a transmitter of some kind Or use a camera-mounted flash in manual,

Or use the built in flash in manual at lowest power to trigger the slaves. Have everything

on the camera in manual. Have the flashes in manual. If using Cactus receivers, flashes

should not be set as slaves but just as normal camera mounted flashes. Otherwise the

slaves need to know that they are to react on the master flash. But manual settings are the

key, and never add a light that isn't needed.

Press down-arrow in Underwater mode

But only in underwater mode!