Olympus BX-RFAA 사용 설명서 - 페이지 27

{카테고리_이름} Olympus BX-RFAA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BX-RFAA 42 페이지.

Using the Joint Plates

NOTES

Fig. 6

Fig. 7

The joint plate @ can be attached and locked between the slider knob

and slider as shown in Fig. 6. The joint plates should be attached on

both ends of the filter slider.

By locking with the joint plates, you can switch the barrier and excitation

filters together as a set.

· When the 6-position filter slider near the rear panel is used, avoid using

the interference type or color glass type filters.

This is because the 6-position filter slider near the rear panel is one

of the positions where the energy from the light source is concen-

trated. When an interference type or color glass type filter is mounted

in it, the filter interference film may peel off or the color glass may be

damaged.

· Make sure that the 6-position filter slider is set to a click position.

· For safety, insert the provided light shield plates in the unused filter posi-

tions.