Olympus BX-RFAA 사용 설명서 - 페이지 28

{카테고리_이름} Olympus BX-RFAA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BX-RFAA 42 페이지.

6-Position Barrier Filter Slider U-RSL6EM

}This filter slider is for common use with the BX-URA2 or BX-RFA illuminator and accommodates a total of six barrier filters.

Slider knob

Inscription sticker position

Diameter 8 mm, depth 1 mm

Light shied position

Filter Mounting Procedure

1. Remove the slider knob on the opposite end to the extremity where the slider inscription is engraved.

2. Gently place the barrier filters in their insertion positions.

# Insert the filters so that their arrow inscriptions on the side face downward.

3. If it is required to inscribe the types of the inserted filters, write them on commercially available round stickers in the same

way as with the U-RLS6 filter slider.

4. Gently insert the filter slider from the right of the analyzer insertion slot on the illuminator, and attach the slider knob which

has been removed in step 1 above.

5. Use the joint plates if you want to interlock this filter slider with the U-RSL6 filter slider. (For the attaching method, see the

description on the U-RSL6.)

NOTES

}Be sure to insert the filter slider in the specified orientation. Otherwise, the filters cannot be set in the correct positioning.

}For safety, insert the provided light shield plates in the unused filter positions.

Light shield plate (x 4)

Barrier filter insertion positions (x 6)

Diameter 25 mm, thickness max. 5 mm

Joint plate