Olympus BX3-RFAS 사용 설명서 - 페이지 14

{카테고리_이름} Olympus BX3-RFAS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BX3-RFAS 16 페이지. Coded function system
Olympus BX3-RFAS에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지), 사용 설명서 (16 페이지)

페이지 인쇄

1. System Chart

Fig. 3

Attaching the U-HSEXP (Fig. 3)

} The U-HSEXP is composed of the U-HSEXP switch (fixed by magnet) and

circular iron plates (adhesive). Two circular plates are provided, with one of

them intended for use as the spare.

1. Attach the switch @ on the center of the circular plate 2 by means of

magnet.

Do not remove the backing sheet of the circular plate until the final fixing

position is decided.

2. Decide the final fixing position that is most convenient for controlling the

switch from the area 3 (indicated by

adjustment knob on the left or right.

3. Clean the final fixing position with absolute alcohol, remove the backing

sheet from the round plate and apply it securely on the final fixing positi-

on.

CAUTION

If there is an article with magnetic field near the U-HSEXP, equip-

ment failure or malfunction may result. So do not let such an

article as listed below come close to the U-HSEXP.

· PC

· Mobile phone

· Clock/watch

· Credit card

· Bank card

· Floppy disk, etc.

} Unless the coded revolving nosepiece (U-D7RES, U-5RES-ESD, U-

D5BDRES-ESD) is connected to the U-CBS, the U-HSEXP does not function.

So be careful.

in the figure) near the coarse