Olympus BX3-RFAS Gebruiksaanwijzing - Pagina 14

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Olympus BX3-RFAS. Olympus BX3-RFAS 16 pagina's. Coded function system
Ook voor Olympus BX3-RFAS: Gebruiksaanwijzing (36 pagina's), Gebruiksaanwijzing (16 pagina's)

Pagina afdrukken

1. System Chart

Fig. 3

Attaching the U-HSEXP (Fig. 3)

} The U-HSEXP is composed of the U-HSEXP switch (fixed by magnet) and

circular iron plates (adhesive). Two circular plates are provided, with one of

them intended for use as the spare.

1. Attach the switch @ on the center of the circular plate 2 by means of

magnet.

Do not remove the backing sheet of the circular plate until the final fixing

position is decided.

2. Decide the final fixing position that is most convenient for controlling the

switch from the area 3 (indicated by

adjustment knob on the left or right.

3. Clean the final fixing position with absolute alcohol, remove the backing

sheet from the round plate and apply it securely on the final fixing positi-

on.

CAUTION

If there is an article with magnetic field near the U-HSEXP, equip-

ment failure or malfunction may result. So do not let such an

article as listed below come close to the U-HSEXP.

· PC

· Mobile phone

· Clock/watch

· Credit card

· Bank card

· Floppy disk, etc.

} Unless the coded revolving nosepiece (U-D7RES, U-5RES-ESD, U-

D5BDRES-ESD) is connected to the U-CBS, the U-HSEXP does not function.

So be careful.

in the figure) near the coarse