Olympus BX3-SSU 사용 설명서 - 페이지 16

{카테고리_이름} Olympus BX3-SSU에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BX3-SSU 24 페이지. Scanning stage with ultrasonic
Olympus BX3-SSU에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄

8-2 Detailed Assembly Procedures

Unlocking Transportation Lock

Installing the scanning stage with ultrasonic (When using BX63)

1. Place BX3-SSU over BX63 so that the respective screw numbers (see the Fig. 6) of BX3-SSU and BX63 are overlapped.

2. Tighten the screw hole @ with the clamping screw (attached with BX3-SSU) from the upper side of BX3-SSU. Use Allen

wrench (40x70mm) attached with BX63 for tightening.

3. Tighten the screw holes 2 and 3 with the clamping screw (attached with BX63) from the lower side of the stage fixing

pillar of BX63. Use Allen wrench (40x70mm) attached with BX63 for tightening.

Front side

Clamping screw (attached with BX3-SSU)

}Tighten with Allen wrench (40x70mm).

Downloaded from

ManualsNet.com

Fig. 11

Clamping screw (attached with BX3-SSU)

}Tighten with Allen wrench (40x70mm).

Upper side of BX3-SSU

search engine

Remove the screw of fixtures @ (4 positions) with the commercially

available Allen wrench.

} As fixtures and screws will be used in transportation, be sure to keep

them in a safe place.

Front side

BX63

Fig. 12

Allen wrench (AxBmm)

Lower side of BX3-SSU

(Fig. 11)

(Fig. 12)