Olympus BX3M-CB 사용 설명서 - 페이지 21
{카테고리_이름} Olympus BX3M-CB에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BX3M-CB 44 페이지. Control box/fm control box
4
Troubleshooting
Meaning of notations in the following tables
Number of beeps: The beep sound is heard when the control box (BX3M-CBFM or BX3M-CB) is combined. This is a number of
this beep sound.
CB : Indicates the lighting state of the indicator of the control box (BX3M-CBFM or BX3M-CB).
HS : Indicates the lighting state of the indicator of the hand switch (BX3M-HS).
MIX : Indicates the lighting state of the indicator of the MIX slider for reflected light observation (U-MIXR).
: Turns ON.
: Blinks.
:Turns OFF.
Phenomena
Number
CB
of beeps
a) The motorized nosepiece does not rotate even though pressing the button of the hand switch for motorized nosepiece
(BX3M-HSRE).
None
: Varies depending on state.
Cause
HS
MIX
The control box
(BX3M-CBFM or
BX3M-CB) is not
connected.
The control box
–
–
(BX3M-CBFM
or BX3M-CB) is
damaged.
BX3M-CB/CBFM
Remedy
Set the main switch to
(OFF) and
connect the control box and the AC
adapter of the control box again.
Then, set the main switch to (ON) and
confirm that the beep is heard once.
If the indicator on the side or the
back of the controller does not light
even though the control box and
the AC adapter of the control box
are connected again, and also if the
beep sound is not heard when the
main switch is set to (ON), contact
Olympus.
Page
9, 27,
28
9, 27,
28
17