Olympus BX3M-CB Talimatlar Kılavuzu - Sayfa 21

Mikroskop Olympus BX3M-CB için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Olympus BX3M-CB 44 sayfaları. Control box/fm control box

Troubleshooting

Meaning of notations in the following tables

Number of beeps: The beep sound is heard when the control box (BX3M-CBFM or BX3M-CB) is combined. This is a number of

this beep sound.

CB : Indicates the lighting state of the indicator of the control box (BX3M-CBFM or BX3M-CB).

HS : Indicates the lighting state of the indicator of the hand switch (BX3M-HS).

MIX : Indicates the lighting state of the indicator of the MIX slider for reflected light observation (U-MIXR).

: Turns ON.

: Blinks.

:Turns OFF.

Phenomena

Number

of beeps

a) The motorized nosepiece does not rotate even though pressing the button of the hand switch for motorized nosepiece

(BX3M-HSRE).

None

: Varies depending on state.

Cause

MIX

The control box

(BX3M-CBFM or

BX3M-CB) is not

connected.

The control box

–

(BX3M-CBFM

or BX3M-CB) is

damaged.

BX3M-CB/CBFM

Remedy

Set the main switch to

(OFF) and

connect the control box and the AC

adapter of the control box again.

Then, set the main switch to (ON) and

confirm that the beep is heard once.

If the indicator on the side or the

back of the controller does not light

even though the control box and

the AC adapter of the control box

are connected again, and also if the

beep sound is not heard when the

main switch is set to (ON), contact

Olympus.

Page

9, 27,