Olympus BX41 사용 설명서 - 페이지 9

{카테고리_이름} Olympus BX41에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BX41 34 페이지. System microscope
Olympus BX41에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지)

USING THE CONTROLS

Fig. 4

Fig. 5

Fig. 6

1. Turn the brightness adjustment knob @ clockwise to increase the volt-

2. The numerals ² below the knob indicate the approximate voltage.

}The light intensity preset switch @ makes it possible to limit the light

1. Press the light intensity preset switch @ to the ON position. (The face of

2. Using a small flat-blade screwdriver, turn the preset adjustment screw ²

3. When the light intensity preset switch is set to OFF, the brightness returns

}While the light intensity preset switch is ON, turning the brightness ad-

}You can place a filter in the light path with either method.

# Even when a filter cassette is used, a filter with thickness of no more

Voltage Indication

age and make illumination brighter.

Using the Light Intensity Preset Switch

intensity to a preselected level regardless of the position of the bright-

ness adjustment knob. The light intensity preset switch has been set to

about 4 V at the factory.

the switch lights when it is ON.)

to obtain the required light intensity. Turning the screw clockwise increases

brightness.

to the level set by the brightness adjustment knob.

justment knob does not affect brightness.

· Place a filter on the filter mount on the base and engage in the light path.

· Insert a filter in the U-FC filter cassette, attach it on the filter mount and

engage it in the light path by sliding the filter level. (Page 8)

Mounting a Single Filter

A filter with a diameter of 45 mm can be placed on the filter mount on the

base. If you need to place multiple filters, please purchase the U-FC filter

cassette.

than 3 mm can still be placed on the filter mount.

(Fig. 6)

(Fig. 4)

(Fig. 5)

(Figs. 6 - 10)

(Page 7)