Olympus BX43 사용 설명서 - 페이지 41

{카테고리_이름} Olympus BX43에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BX43 48 페이지. System microscope

Fig. 52

Fig. 53

Fig. 54

Fig. 55

Attaching the AC Adapter

· Cables and cords are vulnerable when bent or twisted. Never

CAUTION

subject them to excessive force.

· Make sure that the main switch is set to "

connecting the power cord (Fig. 52).

1. Insert the connector @ of the AC adapter firmly into the connector 2 on

the microscope.

CAUTION

Always use the designated AC adapter. Using a non-designated

AC adapter may cause malfunction.

Attaching the Power Cord

Always use the power cord provided by Olympus. If no power

CAUTION

cord is provided with the microscope, please select the proper

power cord by referring to section "PROPER SELECTION OF THE

POWER SUPPLY CORD" at the end of this instruction manual.

Operation Using the AC Adapter (Fig. 53)

1. Insert the connector @ of the power cord firmly into the input connector

2 of the AC adapter (Fig. 53).

The power cord should be connected to a grounded/earthed,

CAUTION

3-conductor power outlet. If the power outlet is not grounded/

earthed properly, Olympus can no longer warrant the electrical

safety performance of the equipment.

2. Plug the power cord plug 3 into the wall outlet | (Fig. 55).

Should the power cord come in contact with the hot lamp socket,

CAUTION

the power cord could melt and cause electric shock. Be sure

to route the power cord away from the lamp socket.

Operation Using the TL4 Power Supply Unit (Fig. 54)

} The following operation is not required when the LED lamp is used.

1. Insert the connector @ of the power cord firmly into the input connector

2 of the TL4 (Fig. 54).

2. Plug the power cord plug 3 into the wall outlet | (Fig. 55).

BX43

" (OFF) before