Olympus Fluoview FV1000 사용자 설명서 - 페이지 31
{카테고리_이름} Olympus Fluoview FV1000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus Fluoview FV1000 42 페이지. Confocal microscope
Olympus Fluoview FV1000에 대해서도 마찬가지입니다: 개요 (28 페이지), 간단한 지침 (7 페이지), 간단한 지침 (7 페이지), 사용자 설명서 (9 페이지), 매뉴얼 (3 페이지)
페이지 인쇄
3 Centration of Mercury Burner
3-1 Centering the Mercury Burner
For the reflected light fluorescence observation, refer to the User's Manual for the
Reflected Light Fluorescence System.
Since this system introduces the light of a mercury burner through the light guide, the
burner centering method is slightly different from that described in the User's Manual for
the Reflected Light Fluorescence System. This section is intended to describe the
method specific to this system.
1.
2.
3.
TIP
The arc image stabilizes in 5 to 10 minutes after the mercury burner is turned on.
NOTE
Keep the shutter
target from being heated up.
Centration of Mercury Burner
Turn the shutter
fully toward the bottom to block the light.
When the light guide is disconnected, another built-in shutter is engaged
automatically in the light path to ensure safety.
Remove the light guide
target
.
Turn the shutter
toward the open direction. The arc image of the mercury burner
will be visible on the screen
closed except for centering operation to prevent the centering
/ Centering the Mercury Burner
from the ULH holder and replace with the centering
of the centering target
.
II. PREPARATION For OPERATION
Page
II. 3 - 1