Olympus SZX16 사용 설명서 - 페이지 28

{카테고리_이름} Olympus SZX16에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus SZX16 36 페이지. Research high-class stereo microscope
Olympus SZX16에 대해서도 마찬가지입니다: 개요 (24 페이지), 사용 설명서 (28 페이지), 사용 설명서 (40 페이지)

페이지 인쇄

Operation

...

Fig. 28

Fig. 29

Fig. 30

4. Place the revolving nosepiece mount ³ (with its objective mounts |

facing upward) where the objective mount has been by aligning the

screw holes.

Using the Allen wrench (for M3 screws), clamp the revolver mount with

the provided three clamping screws (M3, 6 mm long) ƒ. (Fig. 28)

# Two screw holes are provided at each position with an interval

of 5 mm. When not using the SZX2-RFA16 reflected fluorescent

light illuminator, use the screw holes closer to the front.

# As the screw holes may be hidden behind the objective mounts |,

clamp the nosepiece mount while rotating it. (Fig. 28)

5. Install the focusing assembly on the pillar, and install the observation

tube in the original position.

6. Attach two objectives onto their respective objective mounts | by screwing.

Hold the objective and gently rotate it until a click position on the front,

where the objective to be used is engaged in the light path.

Operation for Optical Axis Aligned Photomicrography

}Align the center of objective and that of the illumination light path with

the photo light path (the right line) to enable photomicrography with high

contrast.

1. Rotate the desired objective @ clockwise (15°) till the click position for the

photo light path. (Fig. 30)

(Fig. 28)

(Fig. 29)