Olympus SZX16 Instrukcja obsługi - Strona 28

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Olympus SZX16. Olympus SZX16 36 stron. Research high-class stereo microscope
Również dla Olympus SZX16: Przegląd (24 strony), Instrukcja obsługi (28 strony), Instrukcja obsługi (40 strony)

Drukuj stronę

Operation

...

Fig. 28

Fig. 29

Fig. 30

4. Place the revolving nosepiece mount ³ (with its objective mounts |

facing upward) where the objective mount has been by aligning the

screw holes.

Using the Allen wrench (for M3 screws), clamp the revolver mount with

the provided three clamping screws (M3, 6 mm long) ƒ. (Fig. 28)

# Two screw holes are provided at each position with an interval

of 5 mm. When not using the SZX2-RFA16 reflected fluorescent

light illuminator, use the screw holes closer to the front.

# As the screw holes may be hidden behind the objective mounts |,

clamp the nosepiece mount while rotating it. (Fig. 28)

5. Install the focusing assembly on the pillar, and install the observation

tube in the original position.

6. Attach two objectives onto their respective objective mounts | by screwing.

Hold the objective and gently rotate it until a click position on the front,

where the objective to be used is engaged in the light path.

Operation for Optical Axis Aligned Photomicrography

}Align the center of objective and that of the illumination light path with

the photo light path (the right line) to enable photomicrography with high

contrast.

1. Rotate the desired objective @ clockwise (15°) till the click position for the

photo light path. (Fig. 30)

(Fig. 28)

(Fig. 29)