Olympus U-CBS 사용 설명서 - 페이지 13

{카테고리_이름} Olympus U-CBS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus U-CBS 16 페이지. Optical microscope accessory coded function system
Olympus U-CBS에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지), 사용 설명서 (16 페이지)

페이지 인쇄

1. Nomenclature of each Part

Information readout / External transmission

This system configuration enables to acquire the information of following units.

· Information of the hole position (objective position) of the revolving nosepiece

· Information of the mirror unit position of the coded illuminator

The acquired information is transmitted to PC or the microscope digital camera through the RS-232C cable to enable

following functions.

· Implement following functions using PC by interlocking to the hole positions of the revolving nosepiece or mirror

unit positions.

(Increase of the speed of exposure time control, addition of the magnification information to acquired images,

automatic scale change according to objective, etc.)

· Enable to operate the EXPOSE button of the microscope digital camera near the coarse focusing knob of the

microscope frame by using the hand switch.

(For procedures to attach the hand switch, see page 11.)

Transmitting the acquired information to the control box (BX3-CBM) enables following functions.

· Enable to change the optical elements of the motorized condenser when objective is selected by rotating the

coded revolving nosepiece.

(The motorized condenser and control box (BX3-CBM) are required.)

Coded function system