Olympus PT-EP08 사용 설명서 - 페이지 10

{카테고리_이름} Olympus PT-EP08에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus PT-EP08 25 페이지. Underwater case

Installation and removal of the lens port (PPO-EP01: optional)

This Case can be used by mounting the waterproof port for lens on the front of the Case.

Fit the projection part of the front cap into the concave part of the lens ring.

Installation

Fit the

part (1) of the lens port into the concave part in the left side of the port ring.

Then, turn the port ring (2) to lock.

Make sure that the port ring is locked.

Removal

Turn the port ring (4) while sliding the slide lock of the port ring (3).

Then, remove the lens port.

Note:

If using the underwater lens port for

the PT-E series, the port adapter

(PAD-EP08: optional) is required.

If installing, fit the

port adapter into the concave part in

the left side of the port ring.

To install the lens port, refer to the

instruction manual of the lens port.

EN 9

Rear cap

part (1) of the

O-ring

Main unit of PPO-EP01

Front cap