Olympus PT-EP08 Kullanım Kılavuzu - Sayfa 10

Kamera Aksesuarları Olympus PT-EP08 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Olympus PT-EP08 25 sayfaları. Underwater case

Installation and removal of the lens port (PPO-EP01: optional)

This Case can be used by mounting the waterproof port for lens on the front of the Case.

Fit the projection part of the front cap into the concave part of the lens ring.

Installation

Fit the

part (1) of the lens port into the concave part in the left side of the port ring.

Then, turn the port ring (2) to lock.

Make sure that the port ring is locked.

Removal

Turn the port ring (4) while sliding the slide lock of the port ring (3).

Then, remove the lens port.

Note:

If using the underwater lens port for

the PT-E series, the port adapter

(PAD-EP08: optional) is required.

If installing, fit the

port adapter into the concave part in

the left side of the port ring.

To install the lens port, refer to the

instruction manual of the lens port.

EN 9

Rear cap

part (1) of the

O-ring

Main unit of PPO-EP01

Front cap