Olympus PT-EP13 사용 설명서 - 페이지 16

{카테고리_이름} Olympus PT-EP13에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus PT-EP13 25 페이지.

Seal the Case

1 Close the Case gently while aligning the mounting projection of the rear lid and groove.

2 Turn the open/close dial counter clockwise (1 of figure below) until you hear a "click" sound and lock

the Case.

• The Case is sealed.

3 Slide the lock knob towards the LOCK side (2 of figure below).

4 Lower the ON/OFF lever.

CAUTION:

• If the open/close dial is not fully turned, the Case will not be sealed. This will cause water leakage.

• Close the rear lid of the Case so that the lens cap, silca gel or monitor hood strap doesn't catch. If it catches,

water leaks may result.

• When using the flash supplied with the camera, attach the diffuser. When doing this, do not cap the

optical fiber cable insertion slot.

• For details of how to attach the diffuser, refer to "Using the diffuser" (P.9).

After sealing the Case, check that the camera operations normally.

• Operate the ON/OFF lever on the Case and confirm that the camera turns ON/OFF.

• Turn the mode dial on the Case and confirm that the camera mode switches properly.

• Operate the lever and confirm that the camera lever position switches properly.

• Press the shutter lever on the Case and confirm that the camera shutter releases.

• Operate other control buttons/levers on the Case and confirm that the camera functions properly as

intended.

EN 15

Open/close dial

Lock knob