Olympus PSD-10 사용 설명서 - 페이지 4

{카테고리_이름} Olympus PSD-10에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus PSD-10 28 페이지. Electrosurgical unit

FEATURES AND MAIN SPECIFICATIONS

1-1

1. Simplified pre-procedural test, using a Check Lead, of the power output of

the PSD-10 alone as well as that of the entire electrosurgical system includ-

ing the endoscope and endoscopic electrodes. Test results confirmed by

TEST "OK" or "FAULT" indicator lights on the front panel.

2. Push-button selection of CUT, COAG or BLEND current. Output power is

controlled by a single-pedal footswitch.

3. The connection monitor circuit detects loose or inadvertent misconnection

of cords or broken wires in the S-P cord (Safety cord and Patient cord).

If any irregularity is present, the monitor activates an alarm and inhibits

output (current is not delivered when the footswitch is depressed) to ensure

safety of the procedure.

4. The feedback ratio monitor scans the entire circuit when the footswitch is

depressed. If excessive leakage current is present, the output is inhibited to

ensure safety of the procedure.

5. Flat switches and display panel can be easily wiped clean.

6. Compact, lightweight and portable.

Non-Controlled Document