AccuLine 40-6537 사용 설명서 - 페이지 12

{카테고리_이름} AccuLine 40-6537에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AccuLine 40-6537 18 페이지. Auto-leveling rotating laser
AccuLine 40-6537에 대해서도 마찬가지입니다: 서비스 매뉴얼 (15 페이지)

페이지 인쇄

1467H-English

Re-calibration

Referencing the results of the self-check and using the "h" mark (the

mid-point between the highest and the lowest point among A, B, C, D).

1. Enter self-calibration mode

a. Power off the instrument and face the X-axis towards the wall.

b. Press

release the power button while still pressing the vibrate button.

Release the vibrate button after all LED flashes three times. The

laser will enter self-calibration mode and continuously rotates.

2. X-axis calibration

a. Opening the cover on the remote control, press the

button, the X LED light on the laser keypad

which means the laser has entered the self-calibration mode

for X-direction.

b. Press

down until it coincides with the "h" mark.

3. Y-axis calibration

a. Turn the instrument by 90º in self-calibration mode and

make Y-axis facing the wall.

b. Press

flashes which means the laser enters self-calibration mode for

Y-direction.

c. Press

down until it coincides with the "h" mark.

4. Self-calibration confirmation

Press

8/6/08

10:07 AM

button and

VIB

button to make the laser beam move up and

button, the Y LED light on the laser keypad

button to make the laser beam move up and

key after finishing re-calibration on both X and Y

Page 12

button simultaneously. Then

flashes